ObXidian er vores hidtil mest avancerede dyse. Denne nyeste abrasiv-dyse er specifikt designet til at printe fibre-fyldte polymerer. I modsætning til andre modstandsdygtige dyser har ObXidian en konstruktion af kobberlegering, der har en lignende termisk ydeevne som messing, hvilket gør den til et ægte plug-and-play-erstatning. Du kan blot bruge de samme slicer-profiler som for dine messing-dyser.

Med en slidstyrke, der er adskillige størrelsesordener højere end alle andre E3D-dyser, er ObXidian virkelig hård. Den er flere størrelsesordener hårdere end Nozzle X og faktisk alle andre generiske hærdede ståldyser. Dette opnås ved at kombinere en værktøjsstålindsats med vores nye E3DLC-belægning. Denne specielt formulerede belægning indlejrer også non-stick-egenskaber i selve dysen, hvilket betyder markant mindre ophobning af plastik omkring dysen.

Bemærk venligst:

• Vi anbefaler ikke brugen af abrasive materialer med dyser, der har en diameter mindre end 0,4 mm.

Nøglefunktioner:

• Materiale: Kobber/hærdet stål samling med E3DLC-belægning.
• Indre diameter: 1,75 mm
• Maksimal temperatur: 300 °C
• Dysestørrelser: 0,4 mm, 0,6 mm

E3D Nozzle X

The Nozzle X is our ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle.

Whilst our hardened steel nozzles are ideal for printing abrasive filaments such as ones loaded with Carbon Fibre, the extreme temperatures can cause the steel to temper and soften, ultimately reducing its abrasion resistance. And then there’s our plated copper nozzles, able to cope easily with these immense temperatures but lacking the abrasion resistance required to resist Carbon Fibre. This is where the Nozzle X comes in, a nozzle able to withstand crazy temperatures without softening.

By going with a one-piece all-machined construction we were able to use our existing manufacturing processes to create our carefully tuned internal geometry, which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem.

Original E3D Nozzle X Volcano Benefits of our WS2 ‘polyphobic’ nano-coating:

• Less build up, particularly of sticky and filled materials to the nozzle cone
• Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up
• Slicker, smooth top solid layers with a glassy like finish as a result of the smooth laydown of material
• Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.

Volcano V6 messing dyse til J-head/E3D 3D hotends

I størrelserne

• 0,2mm
• 0,3mm
• 0,4mm
• 0,6mm
• 0,8mm
• 1,0mm
• 1,2mm

Passer til

• Volcano HotEnd 1.75mm Filament
• Artillery Sidewinder X1

Volcano V6 rust fri dyse til J-head/E3D 3D hotends

I størrelserne

• 0,2mm
• 0,4mm
• 0,6mm
• 0,8mm
• 1,0mm
• 1,2mm

Passer til

• Volcano HotEnd 1.75mm Filament
• Artillery Sidewinder X1
• J-head

Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.

Overview

Durable hardened steel nozzles for your Volcano HotEnd add-on. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments such as Woodfill all take their toll on brass nozzles. E3D’s Hardened Steel nozzles will resist wear and last a lifetime. Requires a HotEnd modified with a Volcano. Compatible with the Lulzbot Moarstruder.

Description

Super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates.
Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, as E3D is sure that these nozzles

This is MK 10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle

Fits:

• FlashForge Creator Pro
• FlashForge Creator X
• FlashForge Dreamer
• FlashForge Finder
• Qidi Tech X-One
• Qidi Tech I
• QIDI X-Plus
• QIDI X-MAX
• Dremel Idea Builder​
• Dremel 3D40 Idea Builder
• PowerSpec 3D Pro​
• PowerSpec 3D X
• ​Wanhao Duplicator 4S
• Wanhao Duplicator 4X
• Wanhao i3
• Monoprice Maker Select 3D Printer v2
• Monoprice Maker Select Plus
• Cocoon Create 3D Printer

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.

Fits:

• Micro Swiss MK10 All Metal Hotend ONLY

Rustfri Stål nozzel M6 V5 V6 Stainless steel Nozzle

Passer på Prusa og E3D V6 og V5 hotends