Designet til Resin 3D-printere
Den kemiske sammensætning af lysfølsom resin gør det afgiver en ubehagelig lugt, hvilket har irriteret mange brugere.
Anycubic AirPure kan direkte adsorbere lugtmolekylerne fordampet fra resinen til den aktiverede kulkanal,
og fuldfør derefter luftrensningsprocessen, hvilket er sikkert  og miljøvenlig langsigtet rensningsmetode.

Kompakt design

Passer overalt Anycubic AirPure er mindre end størrelsen på dåse cola: 11,5×4,6×4,6 cm. Den kan placeres hvor som helst i
3D-printer. Den er nem at bruge og har et genopladeligt batteri.

Aktivt kulfilter

Aktivt kulfilter aktivt kul tillader stærke adsorptionspræstationer og filtreringseffekter.Anycubic AirPure er designet med en høj tæthed
aktivt kulfilter med en tykkelse på 18 mm og en vægt på 17g, som effektivt kan absorbere lugten af resin under printning.

Høj hastighed s blæser 

Kraftig ventilator for yderligere at lette det aktive kul, Anycubic AirPure anvender en blæser af høj kvalitet med en hastighed på 5.000 rpm,
en driftsstøj på <45 decibel, og en levetid på <30.000 timer. Ventilatoren kan prale af stærkere vind, hurtigere luft
cirkulation, lavere støj og mere varig og stabil drift.

Stort batteri og Lang udholdenhed

Anycubic AirPure har indbygget high-end, genopladelig 18.650 lithiumbatteri med 2.000 mAh batterikapacitet.
Efter fuld opladning kan den køre kontinuerligt i mere end 14,5 timer. Anycubic AirPure vil fortsat tilbyde dig luft
oprensning selv når du skal printe store modeller.

Udskifteligt filterdesign

Aktivt kul skal udskiftes regelmæssigt. Den høje densitet aktiveret kul kerne (enkelt stykke) af Anycubic
AirPure kan holde i 3-6 måneder. Efter at filteret er mættet med adsorption kan filteret nemt udskiftes ved blot
fjernelse af topdækslet på renseren, forfriskende adsorption vitalitet, som giver dig en frisk og ren brugeroplevelse.

Anycubic AirPure Specifikationer

• Produktnavn: Anycubic AirPure
• Kontroltilstand: Afbryderknap+indikatorlys
• Aktivt kul Kernedimension: 18×38,5×38,5 mm (HWD)
• Indgangsspænding: 5V
• Nominel effekt: 0,6W
• Batterikapacitet: 2.000 mAh
• Produktstørrelse: 115X46X46 mm (HWD)
• Produktvægt: ~410 g
• Lys blinker rødt: lader
• Lys blinker grønt: Lavt batteri
• Lyset er konstant grønt: Normal drift

Indhold af pakken

• Anycubic AirPure 2 styks
• 2x extra kulfilter.
• 1x kabel

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS Dark Gray Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: Mørke grå

Diameter: 1,75 mm
RAL: 7011
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS DRAGON RED Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: DRAGON RED

Diameter: 1,75 mm
RAL: 3031
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS PACIFIC BLUE Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: PACIFIC BLUE

Diameter: 1,75 mm
RAL: 5015
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS DEEP BLACK Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: DEEP BLACK

Diameter: 1,75 mm
RAL: 9017
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS POLAR WHITE Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: POLAR WHITE

Diameter: 1,75 mm
RAL: 9003
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS FOREST GREEN Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: Green

Diameter: 1,75 mm
RAL: 6024
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS CORAL Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: Ivory

Diameter: 1,75 mm
RAL:
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS LION ORANGE Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: Orange

Diameter: 1,75 mm
RAL: 2004
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

smart ABS – material designed for 3D printing. Smart ABS is characterized by high impact resistance and low shrinkage ratio. Unlike standard ABS, the surface of the printout from smart ABS remains shiny, the cohesion of the layers is less visible, and the printed element can be easily drilled.

Advantages of smart ABS:

• high surface hardness
• scratch resistance
• shockproof
• temperature resistance
• less fragile than PLA
• very flexible
• low water absorption
• easility of processing (grinding, drilling, sawing)
• high mechanical strength and stiffness

Smart ABS is a material characterized by high impact resistance and high hardness.

Smart ABS in comparison with the standard ABS is characterized by:

• reduced shrinkage ratio
• shiny surface of the printout
• lower print temperature
• increased flow index

Spectrum Smart ABS can be subjected to technical treatment by drilling, threading and milling.

Spectrum Filaments Smart ABS BAHAMA YELLOW Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Farve: YELLOW

Diameter: 1,75 mm
RAL: 1018
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.