Vibrations dæmper til Nema 17 stepper motor, som sidder på bla. Creality Ender 3, Ender 3 Pro og CR10 serien prisen er pr. styk

Nema 17 steppermotor dæmper bruges til at reducere støjen fra dine NEMA 17 stepper motorer.

Jeg anbefaler kun, at man monterer X og på Y akserne så der skal bruges 2, styk 3 mm skruer til montering.

The Compact But Powerful motor is the recommended motor for The E3D Titan and Titan Aero. It’s lighter and shorter than a typical NEMA17 motor – however, it produces almost as much torque. It is suitable for driving geared or direct extruders. It is also suitable for printer axes, provided they are light-duty, eg: a dual lead screw Z-axis that uses 2 motors.

Compact But Powerful Motor Key Features:

– Step Angle: 0.9°

– Rated Current: 1.68A

– Body length: 40mm

– Faceplate: NEMA 17

Supplied with motor cable.

Creality Stepper Motor 42 motor 42-34 (round shaft) (Motor kan variere i forhold til billede)

Tabellen nedenfor viser, hvilken stepper motor der passer til hvilken akse på de forskellige Creality 3D-modeller

PC2510

The Mount is clamped between the motor and the rear housing of the extruder.

It can be rotated in 90 degrees increments in order to mount the extruder according to your needs.

Mounting holes in the bottom flange is 4.2 mm in diameter. vertical 18.0 mm, horizontal 50.0 mm

Nema17 Pancake stepper with a 150 mm long not detachable stripped cable with connector.

For common ratings, specifications and dimensions please see below or in the datasheet.

• Max Input current: 0.8 A
• Step angle: 1.8 deg.
• Torque: 12 Ncm
• Output shaft diameter: 5.0 mm with flat.
• Hole for mounting: 31 mm, 4xM3
• Motor length: 22 mm
• Weight: 129.5 g

Datasheet

Download

After the upgrade of dual Z axis, the x-axis rises steadily and runs smoothly, which completely avoids the bottom consumables stacking pressure, reduces the lamination caused by z-axis vibration, and greatly reduces the leveling difficulty and leveling times.

Use original T8 precision screw rod, it runs smoothly. All aluminum coupling and original 42 stepper motor are used, stable operation.
No need to weld or replace the motherboard, directly insert the one to two motor wire into the motherboard.

Compared with the upgraded double Z kit sold on the market, this kit contains a power fixed module, which no longer allows the power supply to be scattered freely to avoid electric shock and short circuit.

Included:

• 1 x 42-34 Stepper motor
• 2 x Lead screw bearing guide
• 2 x Power supply holder
• 1 x  Coupler
• 1 x Z axis lead screw bracket
• 1 x Dual z stepper cable
• 1 X Zaxis motor bracket with screw and t-nuts
• 1 x 365 T8 Lead Screw
• 1 x Tool set and screws
• 1 x User manual

Artillery: 09-00161

Tabellen nedenfor viser, hvilken stepper motor der passer til hvilken akse på de forskellige Artillery printere

Tabellen nedenfor viser, hvilken stepper motor der passer til hvilken akse på de forskellige Creality 3D-modeller