Updated Version

Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

Increase Your Printer’s Value

The Bondtech Upgrade Kit For Creality3D CR-10S Pro uses Bondtech Dual Drive Gears to give extra push force and resolution plus a tighter fit between gears and housing to avoid filament jamming.

The Bondtech Upgrade Kit For Creality3D CR-10S Pro is Built for the Creality3D CR-10S Pro

This extruder upgrade kit is for the Creality CR-10S PRO and will replace the original feeder. This kit contains no motor, the original motor is used.

Bondtech`s Dual Drive Performance

This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. It allows for a more reliable printing with all sorts of filaments, both stiff and flexible and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.

Lower Current Recommended

Due to the gearing ratio, the stepper motor can push filament with such force the Bowden tube can be extruded in case there is a clog. To avoid such damage, we recommend lowering the stepper motor Current to near half the original current. Check the Step By Step Guide that teaches users how to do it.

Bowden Solution

The Bowden tube is securely held in place by the 4mm industry standard integrated push-fit connector.

Reducing Filament Jams

There is now a near to 0,1mm gap between the Bondtech gears and SLS 3D printed housing that avoids filament to jam in there. An additional short PTFE Tube is added between the Extruder and the Filament Sensor to allow for easier filament loading and unloading.

SLS Printed Housing

The housing parts are professionally SLS 3D printed with polyamide for maximum strength and precision. Due to the slightly higher geometry of the extruder, the total print height will be 385 mm.

Firmware Update

The Creality3D Firmware needs to be updated in order to use this Upgrade Kit. The E-steps need to be updated to 415 and the total print height is set to 385 mm. Please see the installation guide on how to do it that you will find under the tab “Step By Step Guide”.

What`s In The Box of Bondtech Upgrade Kit For Creality3D CR-10S Pro:

Extruder;
Sensor Spacer;
Thumbscrew;
Motor Gear and M3x3 Set Screw;
4 pcs Countersunk M3x6 screws;
Bondtech Cable Clip;
Powered By BONDTECH Sticker.

Bondtech Upgrade Kit For Creality3D CR-10S Pro Hjælp til installation:

Bondtech Upgrade Kit for Creality For Multiple Models

• Creality CR-10;
• Creality CR-10S;
• Creality Ender3;
• Tevo Tornado;
• Other similar models.

Updated Version

Now this upgrade is supplied with the newest version of the Bondtech Mini Geared (BMG) extruder, featuring brass motor gear, black POM main gear, and threaded push-fit.

Compatible With Multiple Models

This extruder upgrade kit for the Creality CR-10, CR-10S, Ender3, Tevo Tornado and other printers that uses the same type of mounting plate will replace the original feeder.

Dual Drive Extruder

It allows for a more reliable printing with all sorts of filaments, both stiff and flexibles and the DualDrive system ensures that the extruder never loses grip of the filament so grinding, slipping is a thing of the past.
The bowden tube is securely held in place by the 4mm industry standard  integrated push-fit connector.

Improved Performance

This kit includes the BMG (Bondtech Mini Geared) Extruder, a high-performance material feeding system with the ability to print faster and with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament.
The housing parts are professionally SLS printed in polyamide for maximum strength and precision.

Many Versions Available

This kit comes in 2 versions. With Mount
There is an additional version – with mount for a filament sensor – that is compatible with the CR-10S (equipped with filament sensor).

E-steps needs to be updated to 415 and the rotation direction of the motor needs to be reversed, please see the installation guide of how to do it that you will find under the tab “Installation guide”

Bondtech Upgrade Kit for Creality Features

The bowden tube is securely held in place by the 4mm industry standard integrated push-fit connector.
A Filament Adapter is supplied to assist the filament path on and of the extruder.

Update The Firmware Before Use

E-steps needs to be updated to 415 and the rotation direction of the motor needs to be reversed, please see the installation guide of how to do it that you will find under the tab “STEP BY STEP GUIDE”.

Bondtech Upgrade Kit for Creality contains no stepper motor, the original stepper motor of the 3D printer is used.

Hjælp til installation: