E3D V6 All-Metal HotEnd – Techbitshop https://staging1793464891.techbitshop.dk 3D printere, filament, tilbehør og elektronik Sun, 22 Feb 2026 22:12:53 +0000 da-DK hourly 1 https://staging1793464891.techbitshop.dk/wp-content/uploads/2018/08/cropped-icon_techbitshop_clean-32x32.png E3D V6 All-Metal HotEnd – Techbitshop https://staging1793464891.techbitshop.dk 32 32 E3D V6 Titanium HeatBreak 1.75mm https://staging1793464891.techbitshop.dk/vare/e3d-v6-titanium-heatbreak-1-75mm/ Sat, 24 Apr 2021 12:21:08 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=18439

Original E3D V6 titanium HeatBreak

Titanium V6 heatbreaks are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures.

Genuine E3D heatbreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these heatbreaks are exceptionally strong and have lower thermal conductivity than stainless steel heatbreaks, allowing you to keep the cold side of your HotEnd even colder.

The increased strength of these breaks means that they are also much less likely to crack or snap, either while hot-tightening or on the occasional collision with printed parts or printer bed.

Please note:

Available in 1.75mm

Thermal paste is not supplied with the Heatbreak,

]]> E3D Prusa Specific HeatBreak (MK2, MK3) 1.75mm https://staging1793464891.techbitshop.dk/vare/e3d-prusa-specific-heatbreak/ Sun, 04 Apr 2021 08:37:06 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=17964

E3D Prusa Specific HeatBreak (MK2, MK3) 1.75mm

The ‘Prusa specific’ HeatBreak has been specifically designed for the Prusa V6 in order to improve retraction behaviour when using the multi-material upgrade.

]]> Original E3D V6 Heater Block for Sensor Cartridge https://staging1793464891.techbitshop.dk/vare/original-e3d-v6-heater-block-for-sensor-cartridge/ Sun, 04 Apr 2021 07:45:56 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=17961

Original E3D V6 Heater Block for Sensor Cartridge

The V6 heater block is a core part of the E3D ecosystem as the standard heater block used in most of our HotEnds.

Supplied with an M3 grub screw to secure a cartridge-style Thermistor, PT100 or Thermocouple, and an M3 dome head screw to clamp the heater cartridge.

]]> E3D Embedded Bowden Coupling for Metal https://staging1793464891.techbitshop.dk/vare/e3d-embedded-bowden-coupling-for-metal/ Sun, 24 Jan 2021 10:42:29 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=16257

E3D Embedded Bowden Coupling

These pneumatic fittings have a brass metal body which is designed to provide a simple and cost-effective way of inserting bowden tubing directly into your aluminium components.

The couplings are designed to take PTFE tubing with an outer diameter of a 1/8″ (3.18mm) for 1.75mm filament, and 1/4″ (6.35mm) for 3mm filament. Tubing inner diameter will vary according to its filament suitability.

The brass inserts push into an (8mm) hole (6mm) Inches deep.

These fittings are used in both types of the 1.75mm V6 hotends, the 3.0mm Bowden V6 hotend, and the Cyclops/Chimera/Kraken hotends. However there are plenty of other applications ready to be discovered!

]]> E3D V6 Stainless Steel HeatBreak https://staging1793464891.techbitshop.dk/vare/e3d-v6-stainless-steel-heatbreak/ Sun, 24 Jan 2021 09:20:48 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=16244

E3D V6 Stainless Steel HeatBreak

A replacement all-metal stainless steel V6 HeatBreak. These HeatBreaks are the standard for E3D HotEnds such as V6, Titan Aero and Titan Aqua. They feature a refined internal surface finish to reduce extrusion force and improved reliability with retractions. Available in both 1.75mm and 3mm variants.

Please note:

Thermal paste is not supplied with the Heatbreak

]]> E3D V6 Plated Copper HeaterBlock https://staging1793464891.techbitshop.dk/vare/e3d-v6-plated-copper-heaterblock/ Sun, 24 Jan 2021 08:42:13 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=16240

E3D V6 Plated Copper HeaterBlock

A plated copper V6 heater block allows you to reach temperatures exceeding 320°C (providing you use a PT100, PT1000 or thermocouple) unlocking the possibilities of printing high-temperature filaments such as Ultem and PEEK.

Supplied with an M3 grub screw to secure a cartridge-style thermistor, PT100 or thermocouple, and an M3 dome head screw to clamp the heater cartridge.

Including:

  • E3D V6 Plated Copper HeaterBlock

And Fixing Kit (v6)

  • 4 x 3mm Screws for plastic
  • 1 x M3x3 Socket dome screw (Small black screw)
  • 1 x M3 Washer
  • 2 x M3x10 Socket dome screw (Long black screw)
  • 2 x grub screw
  • 1 x 2.5mm Hex wrench key
  • 1 x 1.5mm Hex wrench key
]]> E3D V6 All-Metal HotEnd til direct drive 12v https://staging1793464891.techbitshop.dk/vare/e3d-v6-all-metal-hotend-til-direct-drive-12v/ Thu, 07 Jan 2021 21:19:54 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=15854

E3D V6 All-Metal HotEnd til direct drive 12v

Description

kit

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Kit contains:
– 1 x V6 heatsink 1.75mm
– 1 x V6 heatbreak 1.75mm
– 1 x V6 nozzle 1.75mm
– 1 x V6 duct
– 1 x V6 aluminium heater block
– 1 x Heater cartridge 12V
– 1 x Thermistor cartridge
– 1 x Thermistor extension cable
– 1 x 30 x 30 x 10 fan 12V
– 1 x Thermal compound
– 1 x V6 fixings kit
– 1 x V6 silicone sock
– 1 x PTFE tubing

]]> E3D V6 All-Metal HotEnd til direct drive 24V https://staging1793464891.techbitshop.dk/vare/e3d-v6-all-metal-hotend-til-direct-drive-24v/ Thu, 07 Jan 2021 21:15:26 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=15853

E3D V6 All-Metal HotEnd til direct drive 24V

Description

kit

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Kit contains:
– 1 x V6 heatsink 1.75mm
– 1 x V6 heatbreak 1.75mm
– 1 x V6 nozzle 1.75mm
– 1 x V6 duct
– 1 x V6 aluminium heater block
– 1 x Heater cartridge 24V
– 1 x Thermistor cartridge
– 1 x Thermistor extension cable
– 1 x 30 x 30 x 10 fan 24V
– 1 x Thermal compound
– 1 x V6 fixings kit
– 1 x V6 silicone sock
– 1 x PTFE tubing

]]> E3D V6 All-Metal HotEnd til bowden tube 24V https://staging1793464891.techbitshop.dk/vare/e3d-v6-all-metal-hotend-til-bowden-tube-24v/ Thu, 07 Jan 2021 21:12:24 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=15851

E3D V6 All-Metal HotEnd til bowden tube 24V

kit

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

E3D V6 All-Metal HotEnd til bowden tube 24V Kit contains:
– 1 x V6 heatsink 1.75mm
– 1 x V6 heatbreak 1.75mm
– 1 x V6 nozzle 1.75mm
– 1 x V6 duct
– 1 x V6 aluminium heater block
– 1 x Heater cartridge 24V
– 1 x Thermistor cartridge
– 1 x Thermistor extension cable
– 1 x 30 x 30 x 10 fan 24V
– 1 x Thermal compound
– 1 x V6 fixings kit
– 1 x V6 silicone sock
– 1 x PTFE tubing 800mm

]]> E3D V6 All-Metal HotEnd til bowden tube 12v https://staging1793464891.techbitshop.dk/vare/e3d-v6-all-metal-hotend-til-bowden-tube-12v/ Thu, 07 Jan 2021 20:44:24 +0000 http://staging1793464891.techbitshop.dk/?post_type=product&p=15847

E3D V6 All-Metal HotEnd til bowden tube 12v

Description

kit

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Kit contains:
– 1 x V6 heatsink 1.75mm
– 1 x V6 heatbreak 1.75mm
– 1 x V6 nozzle 1.75mm
– 1 x V6 duct
– 1 x V6 aluminium heater block
– 1 x Heater cartridge 12V
– 1 x Thermistor cartridge
– 1 x Thermistor extension cable
– 1 x 30 x 30 x 10 fan 12V
– 1 x Thermal compound
– 1 x V6 fixings kit
– 1 x V6 silicone sock
– 1 x PTFE tubing 800mm

]]>