Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

All sheets are checked and verified to be within tight specifications. However,
these specifications are both considering the manufacturing method and the sheets function (adhesion and durability used with certain material types), but not the cosmetic aspect of the pattern left on printed parts. We can not guarantee the pattern left on your printed objects will match perfectly from sheet to sheet.

WARNING:

Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our Blog.

Pros

• Scratchproof, hard to damage
• Transfers texture to prints
• More forgiving Live Adjust Z setting
• No need for glue stick for PETG
• Prints automatically detach after sheet cools down
• First layer can be more squished compared to smooth sheets

Cons

• PLA prints with a small contact area may need a brim
• Need to change Live Adjust Z if you also own Smooth PEI sheet
• PLA prints with a huge footprint may warp
• Never clean with acetone

Nu kan du købe løse hjælpere til at lave mini-trommen fra Dan Die sæt 7946, der udkom i efteråret 2023. Der er nu også lavet en ekstra bred bund, så der er plads til 3 pyntelag i kraftigt karton.

Husk at vælge variant:

1. Lav 1 eller 4 trommer (antal)
2. Som almindelig (samme som i tidligere udgivet sæt) eller med ekstra bred bundplade (plads til 3 pyntelag i kraftigt karton).

Mine hjælpere er designet udfra mine favorit kartoner til trommerne:

• Gavlhusets offwhite 240g basiskarton til indertrommen
• Rødt velour papir til pyntetrekanten
• Guld læder karton til pyntelag samt de tynde pyntestrimler

Som noget nyt er jeg begyndt at skrive nr i printet, så man nemmere kan finde det rette die-sæt. Det vil løbende blive opdateret på mine eksisterende designs, samt forbedring af ældre cylindre mv.

This product includes:

• IR filament sensor 1 (pcs)
• IR filament sensor-Buddy board cable (1 pcs)
• Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs)
• PTFE tube (1 pcs)
• MINI FSENSOR BOX (1 pcs)
• MINI FSENSOR COVER (1 pcs)
• MINI FSENSOR LEVER (1 pcs)
• Steel ball (1 pcs)
• Magnet (2 pcs)
• Screws: M3x12 (3 pcs), M2x8 (1 pcs)

Compatibility:

• Original Prusa Mini
• Original Prusa Mini+

This product is replacement Hotend heater cartridge E3D 24V 40W. It is ONLY compatible with the MINI/+. It is NOT compatible with the MK2/S, MK2.5/S and MK3/S/+. The Molex connector is NOT included.

This product includes:

• Hotend heater cartridge E3D 24V 40W (1 pcs)

Specifications:

• Voltage: 24V
• Wattage: 40W
• Length: 820 mm

To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.

Kompatible printermodeller: MINI , MINI+

This product includes:

• Hotend thermistor E3D (1 pcs)

Specifications:

• Connector: Molex 5057-9402
• Cable length: 840 mm

To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.

Heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S and MK3/S/+, MINI /+

Kompatible printermodeller: MK3/S/+, MK2, MK2S, MK2.5, MK2.5S, MINI /+

This product includes:

• Heatbed thermistor (1 pcs)
• Kapton tape (1 pcs)
• Aluminum tape (1 pcs)

Specifications:

• Connector: Molex 5057-9402
• Cable length: 650 mm

Dette produkt inkluderer:

Hotend ventilator (1 stk) version A Noctua
Fastgørelsesmidler

Incl. nye strips til at samle ledninger med efter skift.