ObXidian er vores hidtil mest avancerede dyse. Denne nyeste abrasiv-dyse er specifikt designet til at printe fibre-fyldte polymerer. I modsætning til andre modstandsdygtige dyser har ObXidian en konstruktion af kobberlegering, der har en lignende termisk ydeevne som messing, hvilket gør den til et ægte plug-and-play-erstatning. Du kan blot bruge de samme slicer-profiler som for dine messing-dyser.

Med en slidstyrke, der er adskillige størrelsesordener højere end alle andre E3D-dyser, er ObXidian virkelig hård. Den er flere størrelsesordener hårdere end Nozzle X og faktisk alle andre generiske hærdede ståldyser. Dette opnås ved at kombinere en værktøjsstålindsats med vores nye E3DLC-belægning. Denne specielt formulerede belægning indlejrer også non-stick-egenskaber i selve dysen, hvilket betyder markant mindre ophobning af plastik omkring dysen.

Bemærk venligst:

• Vi anbefaler ikke brugen af abrasive materialer med dyser, der har en diameter mindre end 0,4 mm.

Nøglefunktioner:

• Materiale: Kobber/hærdet stål samling med E3DLC-belægning.
• Indre diameter: 1,75 mm
• Maksimal temperatur: 300 °C
• Dysestørrelser: 0,4 mm, 0,6 mm

Vores mest avancerede dyse indtil nu. ObXidian er vores nyeste sliddelte dyse, specielt designet til at printe fibre-fyldte polymerer. I modsætning til andre sliddelte dyser har ObXidian en konstruktion af kobberlegering, der har en lignende termisk ydeevne som messing, hvilket gør den til et ægte drop-in-erstatning. Du kan blot bruge de samme slicer-profiler som for dine messingdyser.

Med en slidstyrke, der er flere størrelsesordener højere end nogen anden E3D-dyse, er ObXidian virkelig hård. Adskillige størrelsesordener hårdere end Nozzle X og faktisk enhver anden generisk hærdet ståldyse. Dette opnås ved at kombinere en værktøjsstålssats med vores nye E3DLC-belægning. Denne specielt formulerede belægning giver også dyserne non-stick egenskaber, hvilket betyder markant mindre plastopbygning omkring dyseområdet.

Bemærk venligst:

• Vi anbefaler ikke brug af slidende materialer med dysediametre mindre end 0,4 mm.

Nøglefunktioner:

• Materiale: Kobber/hærdet stål samling med E3DLC-belægning.
• Indre diameter: 1,75 mm.
• Maksimal temperatur: 300°C.
• Dysestørrelser: 0,4 mm, 0,6 mm.

E3D Nozzle X

The Nozzle X is our ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle.

Whilst our hardened steel nozzles are ideal for printing abrasive filaments such as ones loaded with Carbon Fibre, the extreme temperatures can cause the steel to temper and soften, ultimately reducing its abrasion resistance. And then there’s our plated copper nozzles, able to cope easily with these immense temperatures but lacking the abrasion resistance required to resist Carbon Fibre. This is where the Nozzle X comes in, a nozzle able to withstand crazy temperatures without softening.

By going with a one-piece all-machined construction we were able to use our existing manufacturing processes to create our carefully tuned internal geometry, which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem.

Original E3D Nozzle X Volcano Benefits of our WS2 ‘polyphobic’ nano-coating:

• Less build up, particularly of sticky and filled materials to the nozzle cone
• Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up
• Slicker, smooth top solid layers with a glassy like finish as a result of the smooth laydown of material
• Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.

The Nozzle X is our ‘One to rule them all’ nozzle, made from a special alloy of tool steel we have been able to create a nozzle that is immensely hard, but also maintains its hardness to high temperatures without softening. We have also added a layer of hard, slick nickel plating which provides a fantastic balance of cost and wear resistance. The cherry on the top? Our NEW WS2 ‘polyphobic’ nano coating, no longer will you find hot molten polymers sticking to your nozzle.

Whilst our hardened steel nozzles are ideal for printing abrasive filaments such as ones loaded with Carbon Fibre, the extreme temperatures can cause the steel to temper and soften, ultimately reducing its abrasion resistance. And then there’s our plated copper nozzles, able to cope easily with these immense temperatures but lacking the abrasion resistance required to resist Carbon Fibre. This is where the E3D Nozzle X V6 comes in, a nozzle able to withstand crazy temperatures without softening.

By going with a one-piece all-machined construction we were able to use our existing manufacturing processes to create our carefully tuned internal geometry, which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem.

Benefits of our WS2 ‘polyphobic’ nano-coating:

• Less build up, particularly of sticky and filled materials to the nozzle cone
• Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up
• Slicker, smooth top solid layers with a glassy like finish as a result of the smooth laydown of material
• Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.