En fremragende alternativ til PET-G

Spectrum Premium PCTG filament er en fremragende alternativ til PET-G, som er velkendt i 3D-printverdenen. Tilhørende den samme materialefamilie af copolyestre tilbyder PCTG-filament lignende nemhed ved printning som PET-G. En meget vigtig fordel ved Premium PCTG-filamentet er dets øgede slagstyrke, høje dimensionsstabilitet og lav krympning. Spectrum Premium PCTG-filament kombinerer de mest ønskelige egenskaber fra Tough PLA og PET-G. PCTG-materialet har en varmefordelingstemperatur på 76°C, samt en fremragende printoverflade og højere elasticitet. Yderligere fordele inkluderer den høje kemiske modstandsdygtighed af de printede modeller.

Elementer lavet med Spectrum Premium PCTG transparente farver har højere klarhed end deres modstykker lavet med PET-G. Dette betyder, at det er muligt at opnå en effekt tæt på gennemsigtighed med få eksterne konturer.

Opvarmet byggekammer er ikke nødvendigt for printning.

Vigtigste funktioner:

• Varmefordelingstemperatur (HDT) – 76°C
• Højere slagstyrke end Premium PET-G
• Højere gennemsigtighed end Premium PET-G (gælder for transparente farver)
• Nemhed ved printning, bearbejdning og efterbehandling
• Kemisk modstandsdygtighed
• Høj dimensionsnøjagtighed af de printede elementer
• Hydrofobisk, lugtfri
• Fremragende printoverflade

Anvendelser:

• Visuel og funktionel prototyper
• Passformtest
• Konceptuelle modeller
• Produktionsværktøjer

Spectrum Filament PCTG SULFUR YELLOW

RAL: RAL 1018
Diameter: 1,75 mm
Dimensionstolerance: ± 0,03 mm
Anbefalet print temperatur: 250-270 ° C
Opvarmet emneplade: 60-100 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

Where durability and flexibility is essential

Spectrum S-Flex 90A is a filament designed for 3D printing, which enables you to manufacture flexible items in a much simpler way than with other materials of this type. The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform. Due to the resistance to hydrocarbons and good lamination between layers, you may manufacture sealing items which need to be resistant to any operating fluid and to ensure the best tightness possible.

Key features:

• very good wear and tear resistance
• up to 510% elongation at break
• Shore-A hardness of 98
• low shrinkage
• resistance to many common industrial oils and chemicals
• reduced stringing while the printer is running idle
• printing without any major reduction of the printing speed or the filament winding around the extruder drive gear
• shape and material properties stability in the temperature range -30 to + 60°C

Spectrum Filaments TPU S-Flex 98A LION ORANGE 250g Applications:

• Manufacturing of seals with a high chemical resistance
• Production of items, which has to be used as energy adsorbents
• Functional parts
• All kinds of bumpers, vibration dampers
• Guides
• Protective cases
• Snap-fit cases
• Sleeves
• Hinges

Farve: Gul RAL 1018
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 200-230°C
Opvarmet emneplade: 50-70 ° C
Nettovægt: 250 g
Print hastighed: 15-50mm/s

Spectrum Filaments er produceret i Europa.

Where durability and flexibility is essential

Spectrum S-Flex 90A is a filament designed for 3D printing, which enables you to manufacture flexible items in a much simpler way than with other materials of this type. The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform. Due to the resistance to hydrocarbons and good lamination between layers, you may manufacture sealing items which need to be resistant to any operating fluid and to ensure the best tightness possible.

Key features:

• very good wear and tear resistance
• up to 510% elongation at break
• Shore-A hardness of 98
• low shrinkage
• resistance to many common industrial oils and chemicals
• reduced stringing while the printer is running idle
• printing without any major reduction of the printing speed or the filament winding around the extruder drive gear
• shape and material properties stability in the temperature range -30 to + 60°C

Spectrum Filaments TPU S-Flex 98A BAHAMA YELLOW 250g Applications:

• Manufacturing of seals with a high chemical resistance
• Production of items, which has to be used as energy adsorbents
• Functional parts
• All kinds of bumpers, vibration dampers
• Guides
• Protective cases
• Snap-fit cases
• Sleeves
• Hinges

Farve: Gul RAL 1018
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 200-230°C
Opvarmet emneplade: 50-70 ° C
Nettovægt: 250 g
Print hastighed: 15-50mm/s

Spectrum Filaments er produceret i Europa.

Spectrum Filaments TPU S-Flex 98A BAHAMA YELLOW