Spectrum Filaments PET-G MATT POLAR WHITE

Imponerende mat overflade

Spectrum PET-G MATT er et materiale baseret på PET-G med en modificeret kemisk sammensætning, der gør det muligt at opnå mat overflade på printede objekter. Den matte finish på printede genstande forbedrer betydeligt deres æstetiske egenskaber og minimerer synligheden af lagene på sideoverfladerne af printede genstande.

Derudover bevarer Spectrum PET-G MATT alle egenskaberne fra klassiske PET-G-baserede polymerer, såsom nem og yderst effektiv printning, minimal krympning og meget god klæbning mellem lagene og mellem byggeplatformen og det printede objekt. Desuden har anvendelsen af tilsætningsstoffer forbedret temperaturbestandigheden, slagstyrken og reduceret skørheden af de printede genstande.

Nøglefunktioner:

• Vicat blødgøringstemperatur – 75°C
• UV-stabilisering
• Overflade med høj kvalitet i mat finish med næsten usynlige lag.
• Øget sammenhæng mellem lagene
• Høj holdbarhed
• Høj stivhed af genstande
• Ingen formindskelse efter afkøling.

Spectrum Filaments PET-G MATT POLAR WHITE Applikationer:

• Indretning af indendørsrum
• Uddannelsesprojekter
• Arkitektoniske modeller
• Industriel design prototyping til konceptvisualisering

RAL: 9003
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 230-255 ° C
Opvarmet emneplade: 60-80 ° C
Nettovægt: 1000 g
Samlet vægt: 1400 g
Spoledimensioner: udvendig diameter – 20 cm, indvendig diameter. 5,2 cm, bredde. 6,7cm

Spectrum Filaments er produceret i Europa.

Where durability and flexibility is essential

Spectrum S-Flex 90A is a filament designed for 3D printing, which enables you to manufacture flexible items in a much simpler way than with other materials of this type. The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform. Due to the resistance to hydrocarbons and good lamination between layers, you may manufacture sealing items which need to be resistant to any operating fluid and to ensure the best tightness possible.

Key features:

• very good wear and tear resistance
• up to 500% elongation at break
• Shore-A hardness of 98
• low shrinkage
• resistance to many common industrial oils and chemicals
• reduced stringing while the printer is running idle
• printing without any major reduction of the printing speed or the filament winding around the extruder drive gear
• shape and material properties stability in the temperature range -30 to + 60°C

Spectrum Filaments TPU S-Flex 98A POLAR WHITE 250g Applications:

• Manufacturing of seals with a high chemical resistance
• Production of items, which has to be used as energy adsorbents
• Functional parts
• All kinds of bumpers, vibration dampers
• Guides
• Protective cases
• Snap-fit cases
• Sleeves
• Hinges

Farve: Hvid RAL 9003
Diameter: 1,75 mm
Dimensionstolerance: ± 0,05 mm
Anbefalet print temperatur: 200-230°C
Opvarmet emneplade: 50-70 ° C
Nettovægt: 250 g
Print hastighed: 15-50mm/s

Spectrum Filaments er produceret i Europa.

Filament PM 1,75 PLA – white 1 kg

PLA – so-called starting material for 3D printing

PLA (polylactic acid)
– easy to print material
– is suitable for printing large objects
– is made from corn starch and biodegradable
– is suitable for beginners, as printing from it is trouble-free
– PLA prints are not ideal for outdoor use (low-temperature resistance, low UV resistance)

Filament PM Hvid PLA PRINTING SETUP
Nozzle: 200 – 220°C
Heatbed: 60 °C
For colors with glitters, we recommend a nozzle of 0.5 mm and larger.

ADVANTAGES:
easy to print
can print tiny parts
can print huge objects
hard and tough
no warping

DISADVANTAGES:
brittle
low-temperature resistance
difficult post-processing

COMPARISON OF ABS AND PLA
PLA is easier and faster to process under the same initial conditions, but its products are significantly less resistant to higher temperatures (it starts to soften around 60 ºC, while ABS up to 90 ºC). So if you expect higher temperatures for the final product, then ABS is a better choice. ABS prints are mostly matte, PLA prints are rather glossy. PLA material is biodegradable, while ABS material is not, but can be recycled. PLA is more suitable for use in the food industry (*without certification, as the certification, would lose its validity the moment the filament passes through the nozzle).

Diameter: 1.75 mm
Tolerance: 0,05 mm
Weight: 1 kg
Empty spool weight: 0.216 kg
Packaging weight: 1.38 kg
Spool dimensions: diameter: 200 mm, height: 75 mm
Packaging dimensions: width: 230 mm, height: 80 mm, depth: 210 mm
Nozzle: 200 – 220 °C
Heatbed: 60 °C
RAL: 9003
Pantone: 705