E3D Revo Six Single Nozzle Kit

No machine redesign. Revo Six is a top choice if you want to update your old E3D V6 setup to the latest generation of E3D HotEnd technology. It has the same height, the same diameter, and the same groove mount as the E3D V6, so it drops straight into V6-fitted machines without the hassle of redesigning print head mounts and accessories. Just fit it, connect the Revo HeaterCore, and you’re ready to 3D print. 

Ready for Revo. Revo Six is designed to work with Revo Nozzles, so you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo Nozzle is factory sealed, making it much simpler to use and more reliable than most HotEnd technology available today. 

Enhanced performance. Revo Six uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium HeaterBlock, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway. 

A new look. An anodised black heat sink distinguishes Revo Six from its predecessor, and every unit ships with a premium crystal-clear fan duct so your machine will stand out from the crowd.

Compatible with:

Prusa i3 MK2/ MK3 variants (make sure you select the correct voltage for your setup)

• The HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a Revo Nozzle and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening.
• Heats up much faster than a typical heaterblock. It’s designed to be much safer, too – a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in the event of a thermal runaway.
• Compatible with many popular 3D printers such as Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides for more information.

Kit includes:

– 1 x Revo HeaterCore 24V

– 1 x Revo HeaterCore spring

– 1 x Revo HeaterCore sock

Micro Swiss NG REVO Direct Drive Extruder

Micro Swiss NG REVO Extruder er resultatet af et samarbejde mellem to førende 3D-printvirksomheder – Micro Swiss og E3D. Denne ekstruder af høj kvalitet er designet med både pålidelighed og effektivitet for øje og kombinerer det bedste fra både E3D og Micro Swiss teknologi.

Denne ekstruder muliggør problemfri integration af RapidChange Revo-teknologi med Micro Swiss NG ekstruder-serien. Den er en ægte plug-and-play erstatning til Creality Ender 5 / 5 Pro / 5 Plus printere (se venligst fitment fanen for detaljer). Dette kit inkluderer alt, hvad der er nødvendigt for at opgradere din printer til et letvægts direkte drivsystem med Revo hotend.

Micro Swiss NG REVO Extruder er den perfekte løsning for dem, der ønsker at forbedre udskriftskvaliteten, øge pålideligheden og opnå større effektivitet i deres 3D-udskrivningsprojekter.

Micro Swiss NG REVO Direct Drive Extruder til Creality Ender 5 / 5 Pro / 5 Plus funktioner:

• Letvægts
• 3:1 Gearforhold
• Kan tilpasses til en bred vifte af 3D-printere
• Hærdet stål, præcisionsskåret Dual Gear-drev
• Bevel Gear-system tillader en ekstrudermontering med lavt overhæng
• Sømløs integration med E3D Revo Hotend
• Hurtig og nem udskiftning af dyse

Micro Swiss NG REVO Direct Drive Extruder til Creality Ender 5 / 5 Pro / 5 Plus Passer til:

• Ender 5
• Ender 5 Plus
• Ender 5 Pro

Micro Swiss Direct Drive Extruder til Creality Pakken indeholder:

• 1x Master Extruder Assembly
• 1x Adaptation plate
• 1x LDO Stepper motor
• 1x Fan Shroud
• 1x Custom extension cable
• 3x Printed Brackets
• 1x Revo Hotend assembly
  • 1x Revo HeaterCore 24V
  • 1x Revo HeaterCore Spring
  • 1x 0.40mm Brass Revo Nozzle

Micro Swiss NG REVO Direct Drive Extruder til Creality Ender 5 / 5 Pro / 5 Plus Printers Hardware:

• 1x Eccentric nut
• 1x M5 x .8 x 30mm CAP SCREW
• 1x 5mm ID 10mm OD Washer
• 1x M5 x .8 Nylon Lock Nut
• 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
• 4x M2.2 x 8mm Thread Forming Screw for Plastic
• 4x M3 x 12mm Thread Forming Screw for Plastic
• 5x Zip Ties
• 4x butt splice connectors

Instllationsvejledning

• Printable shrouds and brackets
• g-code for e-steps 
• STEP File

Micro Swiss NG REVO Direct Drive Extruder

Micro Swiss NG REVO Extruder er resultatet af et samarbejde mellem to førende 3D-printerfirmaer – Micro Swiss og E3D. Denne højkvalitets ekstruder er designet med både pålidelighed og effektivitet for øje og kombinerer det bedste fra både E3D og Micro Swiss teknologi.

Denne ekstruder muliggør problemfri integration af RapidChange Revo teknologi med Micro Swiss NG ekstruder-serien. Den er en ægte plug-and-play erstatning til CR-10 og Ender 3 serien af printere (se venligst fitment fanen for detaljer). Kittet inkluderer alt, hvad der er nødvendigt for at opgradere din printer til et letvægts direkte drivsystem med en Revo hotend, og det leveres med loddemuffe-frie og krympefrie forbindelser til nem tilslutning af varmeelementet og termistor. Hele installationsprocessen tager cirka 30 minutter, og der er ikke behov for firmwaremodifikationer.

Micro Swiss NG REVO Direct Drive Extruder til Creality CR-10 / Ender 3 Printers funktioner:

• Letvægts
• 3:1 Gearforhold
• Kan tilpasses til en bred vifte af 3D-printere
• Hærdet stål, præcisionsskåret Dual Gear-drev
• Bevel Gear-system tillader en ekstrudermontering med lavt overhæng
• Sømløs integration med E3D Revo Hotend
• Hurtig og nem udskiftning af dyse

Micro Swiss NG REVO Direct Drive Extruder til Creality CR-10 / Ender 3 Printers Passer til:

• CR-10
• CR-10s
• CR-10-S5
• CR-10-S4
• Ender 3
• Ender 3 Pro
• Ender 3 V2
• Ender 3 V2 Neo (X Limit Switch Bracket Required)

Micro Swiss Direct Drive Extruder til Creality Pakken indeholder:

• 1x Master Extruder Assembly
• 1x Adaptation plate
• 1x LDO Stepper motor
• 1x Fan Shroud
• 1x Custom extension cable
• 1x Revo Hotend assembly
  • 1x Revo CR HeaterCore 24V
  • 1x Revo HeaterCore Spring
  • 1x 0.40mm Brass Revo Nozzle

Micro Swiss NG REVO Direct Drive Extruder til Creality CR-10 / Ender 3 Printers Hardware:

• 1x Eccentric nut
• 1x M5 x .8 x 30mm CAP SCREW
• 1x 5mm ID 10mm OD Washer
• 1x M5 x .8 Nylon Lock Nut
• 2x M5 x .8 x 20mm Nylon Patch CAP SCREWs
• 4x M2.2 x 8mm Thread Forming Screw for Plastic
• 4x M3 x 12mm Thread Forming Screw for Plastic
• 5x Zip Ties
• 4x butt splice connectors

Instllationsvejledning

• Printable shrouds and brackets
• g-code for e-steps
• STEP File

• The HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a Revo Nozzle and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening.
• Heats up much faster than a typical heaterblock. It’s designed to be much safer, too – a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in the event of a thermal runaway.
• Compatible with many popular 3D printers such as Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. Check out our 3D printer upgrade guides for more information.

Kit includes:

– 1 x Revo HeaterCore 12V or 24V

– 1 x Revo HeaterCore spring

– 1 x Revo HeaterCore sock

Shorter and lighter. Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its compact size also means it occupies less space inside your 3D printer’s build volume – useful for smaller 3D printers.

Capable with wide range of 3D printing filaments. Enjoy excellent performance with all 3D printing materials, particularly challenging materials like flexibles and abrasives. Enhanced extrusion and retraction control means you can 3D print soft flexibles with a shore hardness as low as 75A!

Backwards compatible. The heatsink geometry for Revo Hemera XS accepts Revo Nozzles as well as V6 nozzles with a Hemera HeatBreak (sold separately).

All the force you need. Revo Hemera XS has all the extrusion force you need to drive the entire E3D ecosystem, including high flow HotEnds like SuperVolcano and high flow Revo Nozzles (coming soon!)

Less likely to strip filament. In the event of a jam, the filament drive mechanism for Revo Hemera XS will stall instead of stripping filament, making it easier to recover and get 3D printing again.

Easy nozzle swaps with Revo. A variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.

Better safety. Power reduces to the Revo HeaterCore as it gets hotter, thanks to built-in PTC behaviour. This gives you greater protection against hazards caused by thermal runaways.

T-slot flat mounting. Our custom mounting system means a range of accessories can be mounted on this extrusion system, such as bed levelling probes, expansion boards, and more!

Just add a 3D printer. Everything you need to start 3D printing is in the box, including Revo Nozzles and a Revo HeaterCore. Just mount it to your 3D printer and you’re ready to go!

E3D Revo Hemera XS Key features:

– Max temp: 300°C

– Voltage 24V

– Power: 40W

– Filament diameter: 1.75mm

– Nozzle type: RapidChange Revo

– Mounting system: T-slot

– Step angle: 1.8°

– Recommended current: 1.40A Peak (~0.99A RMS)

– Mass: 256.25g

E3D Revo Hemera XS includes: 

– 1 x Hemera XS Assembly

– 1 x Hemera fixings kit

– 1 x 40 x 40 x 10 mm 24V Fan

– 1 x Revo HeaterCore 24V

– 1 x Revo HeaterCore spring

– 1 x Extension cable kit

E3D Revo Hemera XS Fully Loaded Kit:

– 1 x 0.25, 0.40, 0.60 & 0.80 Brass Revo Nozzles

E3D Revo CR

E3D Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the Creality CR-10 and Ender 3 series.

• Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles
• No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation
• No firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor
• Includes solderless, crimpless, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle
• Detailed [upgrade guides] created by us help you get 3D printing quickly

Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!

Easy nozzle swaps. A variety of Revo Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.

Simple, hassle-free connection. We’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.

Better reliability. Revo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening needed.

Better efficiency. The included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed.

Better safety. Thanks to built-in PTC behaviour of the heater, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.

E3D Revo CR is directly compatible with the following Creality 3D printers:

• Ender 3
• Ender 3 Pro
• Ender 3 V2
• Ender 5
• Ender 5 Pro
• Ender 5 Plus
• Ender 6
• CR10
• CR10S
• CR10S4
• CR10S5

Please note:

• Revo CR can be used with other Creality printers using the NTC thermistor, however you may need to make modifications to the mount and or Z sensor.
• You may need to adjust the Z height when changing nozzles.
• Please check whether your specific printer runs 12V or 24V before purchasing and assembling.

Variants

Revo CR + Revo Nozzle

Revo CR Fully Loaded

Key features

– Max temp: 300°C

– Works with Revo HeaterCore and Revo Nozzles

– Includes solderless, crimpless, butt splice connectors for easy connection

– 100K NTC thermistor embedded in this Revo HeaterCore

 Kit contains

– 1 x  Revo CR heatsink

– 1 x Collet

– 1 x Collet clip

– 1 x Revo HeaterCore 12V or 24V

– 1 x Revo HeaterCore spring

– 1 x Extension cable kit

– 4 x butt splice connector

E3D Revo CR Single nozzle kit:

– 1 x 0.40mm brass Revo Nozzle

E3D Revo CR Fully loaded nozzle kit:

– 1 x 0.25, 0.40, 0.60, and 0.80mm brass Revo Nozzles

Note: M3 bolts not provided

Material compatibility

1.75mm

Mount system

Flat mounting, pre-drilled M3 clearance holes that match Creality mounting pattern

E3D Revo CR Voltage

12V or 24V

Dimensions

Height: 59.10mm

Diameter: 22mm

Revo Voron E3D

RAPIDCHANGE

We’ve developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with our Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers.

• Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening
• Works with a Revo HeaterCore for faster heat-ups
• Rigid mounting using 4 x M3 x 0.5 bolts
• Ultra-lightweight construction for improved speed performance
• Ideal HotEnd for Voron StealthBurner

Ready for Revo. A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers.

Complements your Voron. Includes an anodised red aluminium heatsink to complement your Voron accented parts.

Rigid mounting. This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer.

Compatible with:

Please note:

– For full mounting instructions and STL files for Voron printed parts visit: https://docs.vorondesign.com/

– You may need to adjust your Z offset when changing nozzles.

Key Features:

– Max temp: 300°C

– Voltage: 24V

– Wattage: 40W

– Mounting System: 4 x M3 x 0.5

– Filament diameter: 1.75

– Nozzle type: RapidChange Revo

Revo Voron E3D Kit Includes:

– 1 x Revo Voron Sink

– 1 x Revo HeaterCore 24V

– 1 x Revo spring

– 1 x 100mm 1.75mm PTFE

– 1 x Heater extension cable

– 1 x Temperature sensor extension cable

Single nozzle kit:

– 1 x 0.40mm brass Revo Nozzle

Fully loaded nozzle kit:

– 1 x 0.25, 0.40, 0.60, and 0.80mm brass Revo Nozzles

E3D Revo Hemera Upgrade Single Nozzle Kit

This kit includes a Hemera heatsink with a revised design that’s compatible with a Revo HeaterCore and Revo Nozzles.

– Updated Hemera heatsink adds compatibility for Revo Nozzles and Revo HeaterCore

– Easy upgrade! Just swap over your old Hemera heatsink and attach the Revo HeaterCore

– Comes in your choice of a single Revo Nozzle or a Fully Loaded Nozzle Kit

– Compatible with 1.75mm filaments

Please note: this kit comes in 12V or 24V options.

E3D Revo Hemera Upgrade Single Nozzle Kit  includes:

– 1 x Revo Hemera sink

– 1 x Revo HeaterCore

– 1 x Revo HeaterCore spring

– 1 x Extension cable kit

– 1x  0.40

Lost the spring for your Revo HeaterCore? Don’t worry, we sell spares!

– Keeps the HeaterCore into good thermal contact with a Revo Nozzle

– Effective in attaching Revo HeaterCore to heatsink

– Compatible with Revo Micro, Revo Six, and Revo Hemera

Please note this item is not compatible with V6 ecosystem heatsinks, but it is compatible with Revo Six!

Kit includes:

– 3 x Revo HeaterCore springs